RM新时代入口-首页

力士樂伺服驅動器維修：即使是不同的行業，當設備出現問題的時候。也很難不受到干擾。即使是博士力士樂伺服驅動器，在工作時間長了之后也是會出現故障的。那么是維修還是選擇更換，您必須在短時間內做出回應，以挽回不必要的損失。

力士樂伺服驅動器維修診斷指南：

A010故障含義：Drive Halt驅動器停止

Description:說明：

With the set control, the function drive halt would be activated. The drivestop-function serves to stop the motor with a defined acceleration and defined jerk.通過設置控制，功能驅動停止將被激活。驅動停止功能用于以規定的加速度和定義的跳動。

The acceleration or the jerk limit of the inputted position block functions during "linked block operation."通過設置控制，功能驅動停止將被激活。驅動停止功能用于以規定的加速度和定義的跳動。

The acceleration limit and bipolar jerk value function during jogging operation and stepper motor interface.慢跑操作和步進電機接口期間的加速度限制和雙極性沖動值功能。

The drive will be brought to stand still by the velocity command zero switch during torque regulation and velocity regulation.在扭矩調節和速度調節期間，速度指令零開關將使驅動器停止運行。

A012故障：Control and Power Sections Ready for Operation

控制和電源部分準備運行

Description:說明：

The drive is supplied with control voltage and the power is switched on.

驅動器提供控制電壓，電源打開。

The drive is ready for power delivery驅動器已準備好供電。

A111故障：Velosity Synchronisation, Real Lead Drive快速同步，真正的領先驅動

Description:說明：

The drive is in speed control. The speed command value is derived from

the master axis position. The master axis position is generated from the

incremental encoder signals of the master axis encoder inputs.驅動器處于速度控制狀態。速度命令值來自主軸位置。主軸位置由主軸編碼器輸入的增量編碼器信號。